3.3.2 Rack-Mounting, Reverse Version Of The Magnum 6K32S - GarrettCom Magnum 6K32 Hardware Installation And User's Manual

Magnum 6K32 Managed Switch
Magnum Magnum PW 1 3 5 1
Magnum 1 3 5
10/100 LK 10/100
10/100 LK
Managed Fiber Switch
AC F/
Switch F/ AC F/ 2
2 4 6 2 4 6
10/100 10/100
10/100 LK LK
GARRET
F/H F/H
F/H AC AC
Magnum Magnum PW 1 3 5
Magnum 1 3 5
10/100 LK 10/100
10/100 LK
Managed Fiber Switch
AC F/
Switch F/ AC F/ 2 4 6
2 4 6
10/100 LK 10/100
10/100 LK
GARRET
F/H AC F/H
F/H AC
Magnum PW 1 3 5 1
Magnum Magnum 1 3 5
LK 10/100
10/100 LK 10/100
Managed
Fiber Switch
F/
Switch F/ AC F/ AC 2
2 4 6 2 4 6
10/100 10/100
10/100 LK LK
GARRET
F/H
F/H AC F/H AC
PW 1
Magnum Magnum Magnum 1 3 5 1 3 5
10/100
10/100 LK 10/100 LK
Managed
Fiber Switch
Switch AC F/ AC F/
F/ 2 4 6 2 4 6
10/100 LK 10/100 LK 10/100
GARRET
F/H
F/H AC F/H AC
Fig 3.3.1 Mountings for Magnum 6K32 units rack-mounted in a frame
assemblies in rack-mounting frames where the rack-mount equipment is typically
accessed in operation from both sides.
The bracket mounting holes in the sides of the Magnum 6K32 permits it to be
mounted in various ways. The same holes fit all three types (19", ETSI, 23") of brackets.
The mounting for the 23" is illustrated in Figure 3.3.1 below. The brackets may be
attached flush with the front, or attached in the center for a set-back mounting which may
reduce cabling torque.
The optional 23" brackets and the ETSI (21") brackets each come as a pair in a
package, along with the necessary screws for attaching the brackets to the sides of the
Magnum Switch unit. They must be ordered as line items.

3.3.2 Rack-mounting, Reverse version of the Magnum 6K32s

The optional Reverse Magnum 6K32 Model has all of the cabling (Ethernet
cabling, power cabling and console port cabling) connectors in the rear, and the status
LEDs in the front. The status LEDs that are co-incident with the ports are still present
there, and a second or dual set of LEDs are used for status visibility in the front of the
unit, showing the same data.
There are three options of brackets available to mount in the standard 19"
frame or the 23" frame or ETSI (21") frame. The 19" brackets are included with each
unit, the other two may be purchased if desired.
www GarrettCom com . .
Installation and User Guide (02/05)
3 5
LK
AC
4 6
LK
AC
1 3 5
Standard Flush
LK
AC
2 4 6
LK
23" Mount Bracket
AC
Mid-Range Mount or
3 5
LK
5" Set-Back Bracket
AC
4 6
LK
AC
3 5
LK
AC
2 4 6
LK
AC
24