Table of Contents
Advertisement
Magnum Quad-Series Fiber Switches
3.
Use the LINK LED to ensure proper connectivity by noting that the LED will be
illuminated when the unit is powered and proper connection is established
3.3
Table-Top or Shelf Mounting
The Magnum Quad-Series Switches can be easily mounted on a table-top or
any suitable horizontal surface, and has four rubber feet to provide stability without
scratching finished surfaces.
3.3.1
Wall (or Vertical Surface) Mounting, 8-port QS580
Each Magnum QS580 Switch is shipped with two metal mounting brackets
(and screws) to allow the unit to be mounted in nearly any desired orientation or position.
The brackets are attached to the metal switch case using one of the metal screws for each
bracket, and attached to the Magnum QS580 through the round hole of the bracket. A
user-supplied screw attaches the bracket to the mounting surface. It is recommended that
the mounting brackets be attached to two opposite corners of the unit. When properly
attached, the brackets will extend slightly below the base of the unit to allow clearance
for the rubber feet and for cooling fan exhaust space.
MagnumQS58
mounting
Figure 3.1: Magnum QS580, metal mounting brackets
3.3.2
Rack-mounting, models QS5108 and QS5116
Installation of a Magnum QS5108 and QS5116 mixed-media fiber Switch in a
19" rack is a simple procedure.
The units are 1U (1.70") high.
When properly installed, the
front-mounted LED status
indicators should be in plain
view and easy to read. Rack-mount installation requires special 19" rack-mounted
www GarrettCom com
.
.
0, optional
brackets
Magnum QS5116
Magnum QS5116
PWR
Magnum QS5116
Fiber Switch
Fiber Switch
GARRE
TT
18
Installation and User Guide (06/03)
Magnum QS580
Fiber Switch
GARRETT
GARRETT
Proper mounting
bracket attachment
100/10
100/10
ACT
ACT
LK
1
LK
ACT
1
2
2
3
3
4
4
FDX/HDX
FDX/H DX
100/10
FDX/HDX
100 Mb/s
ACT
1
LK
ACT
LK
2
3
4
FDX/HDX
Hide quick links:
Advertisement
Table of Contents
