GarrettCom Magnum 6K32 Hardware Installation And User's Manual page 34

Magnum 6K32 Managed Switch
Fig 3.5.1b: Pulling out the top coved from the chassis base
Caution: Be careful not to disturb the power supply.
Looking down into the Magnum 6K32 unit, notice that there are individual PM
installation spaces and female latch (white) connectors provided on the far right side of
main board along with four stand-off's for 6KPM card position. (See Figure 3.5.1c).
Step 3. Remove front panel face plate retaining screws
There are one PM slot located on the front-right side of the chassis cover. Looking into
the vertical placed Chassis cover of the unit, there are one bracket with retaining screws
www GarrettCom com . .
Installation and User Guide (02/05)
Figure 3.5.1c:
Magnum 6K32's
modular slot side
(front-right side),
without chassis
cover
28