GarrettCom Magnum 6K32 Hardware Installation And User's Manual page 36

Magnum 6K32 Managed Switch
Step 3. The figure here illustrates the basic layout of an individual PM card. 6KPM
card fits into the space provided on the main board over the grand-daughter Bd. and the
male latched cream color connector( as shown in above fig. with arrow mark).
Fig 3.5.2d: Daughter Board shown upside down with two male latch connectors
Step 4. Hold the daughter board with both hands at the end and align the two cream
color latching connectors (male) placed at the bottom of the daughter board
with the other female connector placed on the Granddaughter and main board.
As shown above in Fig. 3.5.2e
Step 5. Once the latching connectors are aligned properly and the mounting holes are
aligned with stand offs then press slowly and firmly with two fingers (as shown
Securely latching up 6KPM Cards into a Magnum 6K32
www GarrettCom com . .
Installation and User Guide (02/05)
Fig 3.5.2e Daughter
Bd. Being placed
over the Grand
daughter Bd. and the
mating connector
being matched to
lockup properly
below in Fig.
3.5.2f) on the top
of the latching
connectors until the
connectors latched
up securely.
Fig.3.5.2f:
30