Functional Architecture Overview
3.1
Processor Support
The server board includes two Socket-R (LGA2011) processor sockets and can support one or
two of the following processors:
®
®
Intel
Xeon
processor E5-2600 product family, with a Thermal Design Power (TDP) of
up to 135W
®
®
Intel
Xeon
processor E5-2600 product family, with a Thermal Design Power (TDP) of
up to 150W with Intel
Note: Previous generation Intel
described in this document.
Visit the Intel web site for a complete updated list of supported processors.
3.1.1
Processor Socket Assembly
Each processor socket of the server board is pre-assembled with an Independent Latching
Mechanism (ILM) and Back Plate which allow for secure placement of the processor and
processor heat to the server board.
The illustration below identifies each sub-assembly component.
3.1.2
Processor Population Rules
Note: Although the server board does support dual-processor configurations consisting of
different processors that meet the defined criteria below, Intel
16
®
Server Board S2600COE with possible configuration limits.
®
®
Xeon
processors are not supported on the Intel server boards
Figure 11. Processor Socket Assembly
Intel order number G42278-002
Intel® Server Board S2600CO Family TPS
®
does not perform validation
Revision 1.0