Secure Shell (Ssh); Serial-Over-Lan (Sol 2.0); Platform Event Filter; Table 19. Factory Configured Pef Table Entries - Intel S2600CO Family Technical Product Specification

Intel® Server Board S2600CO Family TPS
If the BMC is first configured for static (prior to enabling VLAN), when VLAN is enabled,

the BMC has the same IP address that was configured before. It is left to management
application to configure a different IP address if that is not suitable for VLAN.
If the BMC is configured for static (prior to disabling VLAN), when VLAN is disabled, the

BMC has the same IP address that was configured before. It is left to management
application to configure a different IP address if that is not suitable for VLAN.
6.10.7

Secure Shell (SSH)

Secure Shell (SSH) connections are supported for SMASH-CLP sessions to the BMC.
6.10.8

Serial-over-LAN (SOL 2.0)

The BMC supports IPMI 2.0 SOL.
IPMI 2.0 introduced a standard serial-over-LAN feature. This is implemented as a standard
payload type (01h) over RMCP+.
Three commands are implemented for SOL 2.0 configuration.
"Get SOL 2.0 Configuration Parameters" and "Set SOL 2.0 Configuration Parameters":

these commands are used to get and set the values of the SOL configuration
parameters. The parameters are implemented on a pre-channel basis. "Activating SOL":
This command is not accepted by the BMC. It is sent by the BMC when SOL is activated
to notify a remote client of the switch to SOL.
Activating a SOL session requires an existing IPMI-over-LAN session. If encryption is

used, it should be negotiated when the IPMI-over-LAN session is established.
6.10.9

Platform Event Filter

The BMC includes the ability to generate a selectable action, such as a system power-off or
reset, when a match occurs to one of a configurable set of events. This capability is called
Platform Event Filtering, or PEF. One of the available PEF actions is to trigger the BMC to send
a LAN alert to one or more destinations.
The BMC supports 20 PEF filters. The first twelve entries in the PEF filter table are pre-
configured (but may be changed by the user). The remaining entries are left blank, and may be
configured by the user.
Event Filter Number
1
2
3
4
5
Revision 1.0

Table 19. Factory Configured PEF Table Entries

Offset Mask
Non-critical, critical and non-recoverable
Non-critical, critical and non-recoverable
Non-critical, critical and non-recoverable
General chassis intrusion
Failure and predictive failure
Intel order number G42278-002
Platform Management Functional Overview
Events
Temperature sensor out of range
Voltage sensor out of range
Fan failure
Chassis intrusion (security violation)
Power supply failure
71