Table of Contents
Advertisement
HAZARD AVOIDANCE
2) Turn the small FMS Knob to select one of the following:
•
BELOW
•
NORMAL
ABOVE
•
•
UNREST (unrestricted)
3) Press the ENT Softkey.
TRAFFIC MAP PAGE DISPLAY RANGE
The display range on the Traffic Map Page can be changed at any time. Map range is adjustable with the
RANGE Knob from 2 to 40 nm, as indicated by the map range rings.
Changing the display range on the Traffic Page:
1) Turn the RANGE Knob.
2) The following range options are available:
•
2 nm
•
2 and 6 nm
6 and 12 nm
•
•
12 and 24 nm
•
24 and 40 nm
Customizing the traffic display on the Navigation Map Page:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With Map Setup highlighted, press the ENT Key (Figure 6-65).
4) Turn the small FMS Knob to select the Traffic Group and press the ENT Key (Figure 6-66).
5) Turn the large FMS Knob or press the ENT Key to scroll through the selections (Figure 6-67).
• TRAFFIC – Turns the display of traffic data on or off
• TRAFFIC MODE – Selects the traffic mode for display; select from:
- All Traffic - Displays all traffic
- TA/PA - Displays Traffic Alerts and Proximity Advisories
- TA ONLY - Displays Traffic Alerts only
• TRAFFIC SMBL – Selects the maximum range at which traffic symbols are shown
• TRAFFIC LBL – Selects the maximum range at which traffic labels are shown with the option to turn off
324
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
190-00595-01 Rev. B
Advertisement
Table of Contents
