Default Gateway - ZyXEL Communications P-870HN-5xb User Manual

Table 19 WAN Configuration: NAT, IGMP Multicast and Firewall Activation: IPoE
LABEL
Enable MLD
Multicast Proxy
Back
Next

5.6.1.5 Default Gateway

The screen is not available when you select Bridging in the WAN Service
Configuration screen.
Figure 41 WAN Configuration: Default Gateway: PPPoE, PPPoA, IPoE or IPoA
The following table describes the labels in this screen.
Table 20 WAN Configuration: Default Gateway: PPPoE or IPoE
LABEL
Selected Default
Gateway
Interfaces
Available Routed
WAN Interfaces
Selected WAN
Interface
Back
Next
P-870HN-5xb User's Guide
DESCRIPTION
Select Enable to have the ZyXEL Device act as an MLD proxy on this
connection. This allows the ZyXEL Device to get subscription
information and maintain a joined member list for each multicast
group. It can reduce multicast traffic significantly.
Click this button to return to the previous screen.
Click this button to continue.
DESCRIPTION
Select a WAN interface through which you want to forward the traffic.
You can select multiple WAN interfaces for the device to try. The
Device tries the WAN interfaces in the order listed and uses only the
default gateway of the first WAN interface that connects; there is no
backup WAN function. To change the priority order remove them all
and add them back in again.
These are the WAN interfaces you can select from.
Select a WAN interface through which to forward IPv6 traffic.
Click this button to return to the previous screen.
Click this button to continue.
Chapter 5 WAN Setup
91