The Mac Filter Screen - ZyXEL Communications P-870HN-5xb User Manual

Chapter 9 MAC Filter

9.2 The MAC Filter Screen

Click Security > MAC Filter to display the following screen. This screen displays
the default global MAC filtering policy and a list of the custom MAC filtering rules.
The MAC filtering rules apply only to frames going through a bridge connection.
Figure 79 MAC Filter
The following table describes the labels in this screen.
Table 47 MAC Filter
LABEL
MAC Filtering
Policy For Each
Interface
Interface
Policy
Change
Change Policy
Interface
Protocol
Destination
MAC
Source MAC
160
DESCRIPTION
This displays the interface to which this rule is applied.
This displays the MAC filtering policy for each WAN interface in bridge
mode on the Device. By default, the Device allows all frames to pass
through the bridge connection.
Select the check box next to the interface for which you want to change
the MAC filtering policy.
Select the Change check box and click Change Policy to have the
Device change to block or allow all frames on this interface.
This displays the interface to which this rule is applied.
This displays the service to which this rule applies.
This displays the destination MAC address to which this rule applies.
Please note that a blank destination address is equivalent to Any.
This displays the source MAC address to which this rule applies. Please
note that a blank source address is equivalent to Any.
P-870HN-5xb User's Guide