ZyXEL Communications P-870HN-5xb User Manual page 261

To change your Device's log settings, click Maintenance > Logs > Log Settings.
The screen appears as shown.
Figure 142 Maintenance > Logs > Log Settings
The following table describes the fields in this screen.
Table 95 Maintenance > Logs > Log Settings
LABEL
Enable
Log Level
Mode
Syslog Server
IP Address
Syslog Server
UDP Port
Apply
P-870HN-5xb User's Guide
DESCRIPTION
Select this to turn on system logging.
Select the severity level of the logs that you want the Device to display,
record and send to the log server.
The Device displays and records the logs with the severity level equal to
or higher than what you selected.
Select Local to record the logs and store them in the local memory of the
Device only.
Select Remote to send logs to the specified log server.
Select Both to record the logs and store them in the local memory and
also send logs to the log server.
Enter the server name or the IP address of the log server.
Enter the UDP port of the log server.
Click Apply to save your customized settings.
Chapter 24 Logs
261