ZyXEL Communications P-870HN-5xb User Manual page 62

Chapter 4 Status Screens
Table 4 Status Screen
LABEL
Memory
Usage
Interface Status
Interface
Status
Rate
More Status
WAN Service
Statistics
Route Info
WLAN
Station List
xDSL
Statistics
LAN
Statistics
Client List
62
DESCRIPTION
This field displays what percentage of the Device's memory is currently
used. Usually, this percentage should not increase much. If memory
usage does get close to 100%, the Device is probably becoming
unstable, and you should restart the device. See
268, or turn off the device (unplug the power) for a few seconds.
This column displays each interface the Device has.
This field indicates whether or not the Device is using the interface.
For the DSL interface, this field displays LinkDown (line is down) or Up
(line is up or connected).
For the LAN interface, this field displays Up when the Device is using
the interface and NoLink when the line is disconnected.
For the WLAN interface, it displays Up when WLAN is enabled or
Disabled when WLAN is not active.
For the DSL interface, it displays the downstream and upstream
transmission rate.
For the LAN interface, this displays the port speed and duplex setting.
For the WLAN interface, it displays the maximum transmission rate.
Click this link to view packet specific statistics of the WAN
connection(s). See Section 4.1.1 on page
Click this link to view the internal routing table on the Device. See
Section 4.1.2 on page 64.
Click this link to display the MAC address(es) of the wireless stations
that are currently associating with the Device. See
page 66.
Click this link to view detailed DSL statistics. See
67.
Click this link to view packet specific statistics on the LAN and WLAN
interfaces. See Section 4.1.5 on page
Click this link to view current DHCP client information. See
4.1.6 on page 71.
Section 25.4 on page
63.
Section 4.1.3 on
Section 4.1.4 on page
70.
Section
P-870HN-5xb User's Guide