Wan Interface; Wan Connection Configuration - ZyXEL Communications P-870HN-5xb User Manual

Table 13 Internet Connection
LABEL
Vlan8021p
VlanMuxId
ConnId
IGMP
NAT
Firewall
IPv6
MLD
Modify
Add

5.6.1 WAN Connection Configuration

Click the Edit or Add button in the WAN Service screen to configure a WAN
connection.

5.6.1.1 WAN Interface

This screen displays when you add a new WAN connection.
Figure 34 WAN Configuration: WAN Interface
P-870HN-5xb User's Guide
DESCRIPTION
This indicates the 802.1P priority level assigned to traffic sent through
this connection. This displays N/A when there is no priority level
assigned.
This indicates the VLAN ID number assigned to traffic sent through
this connection. This displays N/A when there is no VLAN ID number
assigned.
This shows the index number of each connection. This displays N/A
when the interface used by the connection is in Default Mode.
This shows whether IGMP (Internet Group Multicast Protocol) is
activated or not for this connection. IGMP is not available when the
connection uses the bridging service.
This shows whether NAT is activated or not for this interface. NAT is
not available when the connection uses the bridging service.
This shows whether the firewall is activated or not for this connection.
The firewall is not available when the connection uses the bridging
service.
This shows whether IPv6 is activated or not for this connection. IPv6
is not available when the connection uses the bridging service.
This shows whether Multicast Listener Discovery (MLD) is activated or
not for this connection. MLD is not available when the connection uses
the bridging service.
Click the Edit icon to configure the WAN connection.
Click the Remove icon to delete the WAN connection.
Click Add to create a new connection.
Chapter 5 WAN Setup
81