ZyXEL Communications P-870HN-5xb User Manual page 89

Table 17 WAN Configuration: IPoE
LABEL
WAN IPv6
Subnet Prefix
Length
Static WAN
Gateway IPv6
Address
6RD (6to4
Tunneling)
6RD Endpoint
IP Address
6RD IPv6
Prefix
Back
Next
IPoA
Figure 39
the ATM interface and configure a WAN connection using the ATM interface.
The following table describes the labels in this screen.
Table 18 WAN Configuration: IPoA
LABEL
WAN IP Address
WAN Subnet
Mask
Unnumbered
Mode
Gateway IP
Address
P-870HN-5xb User's Guide
DESCRIPTION
Enter the bit number of the IPv6 subnet mask provided by your ISP.
Enter the gateway IPv6 address provided by your ISP.
Select this option to enable IPv6 to IPv4 tunneling. This will
encapsulate IPv6 to IPv4 packets.
Select Set by DCHP if you want to obtain a 6RD endpoint IP address
from a DHCP server. Select Manual Setting to specify the 6RD
endpoint IP address manually.
If you enabled 6RD, specify the 6RD endpoint IP address.
If you enabled 6RD, specify the IPv6 prefix for the endpoint IP
address.
Click this button to return to the previous screen.
Click this button to continue.
This screen displays only when you set the DSL link type to IPoA for
DESCRIPTION
Enter the static IP address provided by your ISP.
Enter the subnet mask provided by your ISP.
Select this if your ISP provided a range of static public IP addresses
for you to use.
Enter the Device's WAN IP address.
Chapter 5 WAN Setup
89