Adding A New Mac Filtering Rule - ZyXEL Communications P-870HN-5xb User Manual

Use this screen to change your Device's MAC filter settings. Click the Edit button
in the Wireless LAN > General screen. The following screen displays.
Figure 57 Wireless LAN > MAC Filter
The following table describes the labels in this screen.
Table 31 Wireless LAN > MAC Filter
LABEL
MAC Restrict
Mode
#
MAC
Address
Modify
Back
Add

7.4.6 Adding a New MAC Filtering Rule

Click the Add button in the MAC Filter screen. The following screen displays.
Figure 58 Wireless LAN > MAC Filter > Add
P-870HN-5xb User's Guide
DESCRIPTION
Define the filter action for the list of MAC addresses in the table below.
Select Disabled to turn off MAC address filtering.
Select Allow to permit access to the Device, MAC addresses not listed will
be denied access to the Device.
Select Deny to block access to the Device, MAC addresses not listed will be
allowed to access the Device
This is the index number of the MAC address.
This is the MAC addresses of the wireless devices that are allowed or denied
access to the Device.
Click the Remove icon to delete the entry.
Click this to return to the previous screen without saving changes.
Click this to create a new MAC filtering rule.
Chapter 7 Wireless LAN
127