Navigation Panel - ZyXEL Communications P-870HN-5xb User Manual

Chapter 3 Introducing the Web Configurator

3.2.1 Navigation Panel

Use the menu items on the navigation panel to open screens to configure Device
features. The following tables describe each menu item.
Table 3 Navigation Panel Summary
LINK TAB
Status
Network
WAN Mode
Layer 2
Interface
Internet
Connection
LAN IP
DHCP Client
List
IPv6
Wireless LAN General
More AP
WPS
WPS Station
WDS
Advanced
Setup
NAT Port
Forwarding
Trigger Port
DMZ Host
ALG
Security
MAC Filter
54
FUNCTION
This screen shows the Device's general device and network status
information. Use this screen to access the statistics and client list.
Use this screen to set whether or not the Device uses PTM over
ADSL.
Use this screen to add or remove a DSL PTM (Packet Transfer
Mode) interface.
Use this screen to configure ISP parameters, WAN IP address
assignment, and other advanced properties.
Use this screen to configure LAN TCP/IP, DHCP and IP alias
settings.
Use this screen to look at the IP addresses currently assigned to
DHCP clients and the IP addresses reserved for specific MAC
addresses.
Use this screen to specify LAN IPv6 settings.
Use this screen to configure the wireless LAN settings, WLAN
authentication/security settings and MAC filtering rules.
Use this screen to configure multiple BSSs on the Device.
Use this screen to enable WPS (Wi-Fi Protected Setup) and view
the WPS status.
Use this screen to use WPS to set up your wireless network.
Use this screen to set up Wireless Distribution System links to
other access points.
Use this screen to configure the advanced wireless LAN settings.
The NAT screens are available only when you enable NAT in a
WAN connection.
Use this screen to make your local servers visible to the outside
world.
Use this screen to change your Device's port triggering settings.
Use this screen to configure a default server which receives
packets from ports that are not specified in the Port Forwarding
screen.
Use this screen to allow SIP sessions to pass through the Device.
Use this screen to configure filtering rule(s) that blocks or allows
traffic according to its destination and/or source MAC address in
bridge mode.
P-870HN-5xb User's Guide