This example uses Dibbler as the DHCPv6 client. To enable DHCPv6 client on your
computer:
Install Dibbler and select the DHCPv6 client option on your computer.
1
After the installation is complete, select Start > All Programs > Dibbler-
2
DHCPv6 > Client Install as service.
Select Start > Control Panel > Administrative Tools > Services.
3
Double click Dibbler - a DHCPv6 client.
4
Click Start and then OK.
5
Now your computer can obtain an IPv6 address from a DHCPv6 server.
6
P-870HN-5xb User's Guide
Appendix E IPv6
363