ZyXEL Communications P-870HN-5xb User Manual page 364

Appendix E IPv6
Example - Enabling IPv6 on Windows 7
Windows 7 supports IPv6 by default. DHCPv6 is also enabled when you enable
IPv6 on a Windows 7 computer.
To enable IPv6 in Windows 7:
Select Control Panel > Network and Sharing Center > Local Area
1
Connection.
Select the Internet Protocol Version 6 (TCP/IPv6) checkbox to enable it.
2
Click OK to save the change.
3
Click Close to exit the Local Area Connection Status screen.
4
Select Start > All Programs > Accessories > Command Prompt.
5
364
P-870HN-5xb User's Guide