Configuring The Default L2Tp Vpn Gateway Example - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 28 L2TP VPN Example
28.2 Configuring the Default L2TP VPN Gateway
Example
Click VPN > Network > IPSec VPN > VPN Gateway to open the screen that
1
lists the VPN gateways. Click the Default_L2TP_VPN_GW entry's Edit icon.
Figure 270 VPN > IPSec VPN > VPN Gateway > Edit
• Configure the My Address setting. This example uses interface ge2 with
static IP address 172.16.1.2.
• Select Pre-Shared Key and configure a password. This example uses top-
secret. Click OK.
Click the Default_L2TP_VPN_GW entry's Enable icon and click Apply to turn
2
on the entry.
Figure 271 VPN > IPSec VPN > VPN Gateway (Enable)
414
ZyWALL USG 2000 User's Guide