ZyXEL Communications P-870HN-5xb User Manual page 55

Table 3 Navigation Panel Summary
LINK TAB
Firewall Incoming
Certificate Local
Certificates
Trusted CA
Advanced
Static Route IP Static Route Use this screen to configure IP static routes to tell your device
Policy
Forwarding
DNS Route
RIP
QoS General
Queue Setup
Class Setup
Policer Setup
Monitor
Dynamic DNS
Remote TR069
MGMT
TR064
Service
Control
IP Address
UPnP General
Parental Time
Control
Restriction
URL Filter
Interface
Group
Captive Portal
Maintenance
System General
Time Setting
P-870HN-5xb User's Guide
FUNCTION
This screen shows a summary of the IP filtering rules, and allows
you to add or remove an incoming IP filtering rule that allows
incoming traffic from the WAN.
Use this screen to view a summary list of certificates and manage
certificates and certification requests.
Use this screen to view and manage the list of the trusted CAs.
about networks beyond the directly connected remote nodes.
Use this screen to configure policy routing on the Device.
Use this screen to forward DNS queries for specific domains to a
specific WAN interface.
Use this screen to configure RIP (Routing Information Protocol)
settings.
Use this screen to enable QoS.
Use this screen to configure QoS queues.
Use this screen to define a classifier.
Use this screen to configure QoS policers to limit the transmission
rate of incoming traffic.
Use this screen to view QoS packets statistics.
This screen allows you to use a static hostname alias for a
dynamic IP address.
Use this screen to configure the Device to be managed by an ACS
(Auto Configuration Server).
Use this screen to enable management via TR-064 on the LAN.
Use this screen to configure which services/protocols can access
which Device interface.
Use this screen to configure from which IP address(es) users can
manage the Device.
Use this screen to turn UPnP on or off.
Use this screen to configure the days and times when the
restrictions are enforced.
Use this screen to prevent users of your network from viewing
inappropriate web content.
Use this screen to map a port to a PVC or bridge group.
Use this screen to enable captive portal to redirect users to a URL.
Use this screen to configure your device's name, domain name,
management inactivity timeout and password.
Use this screen to change your Device's time and date.
Chapter 3 Introducing the Web Configurator
55