Table of Contents
Advertisement
Table 6 Status Screen: Router Mode (continued)
LABEL
Status
Rate
3.2.1 Navigation Panel
Use the sub-menus on the navigation panel to configure EMG2881-T20A features.
Figure 8 Navigation Panel: Router Mode
The following table describes the sub-menus.
Table 7 Navigation Panel: Router Mode
LINK
Status
MONITOR
Client Tables
Chapter 3 Router Mode
DESCRIPTION
For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or connected).
For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or Down
when the 2.4G/5G WLAN is disabled.
For the LAN ports, this displays the port speed or N/A when the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using Ethernet
encapsulation. This field displays N/A when the line is disconnected.
For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/5GHz
WLAN is enabled and N/A when the WLAN is disabled.
TAB
FUNCTION
This screen shows the EMG2881-T20A's general device, system and interface
status information. Use this screen to access the wizard, and summary statistics
tables.
Use this screen to view current DHCP client information.
EMG2881-T20A User's Guide
21
Advertisement
Table of Contents
