Table of Contents
Advertisement
2.2.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure VMG features. The following
tables describe each menu item.
Table 3 Navigation Panel Summary
LINK
Connection Status
Network Setting
Broadband
Wireless
Home
Networking
Routing
Chapter 2 The Web Configurator
TAB
FUNCTION
This screen shows the network status of the VMG and computers/devices
connected to it.
Broadband
Use this screen to view and configure ISP parameters, WAN IP address
assignment, and other advanced properties. You can also add new
WAN connections.
Cellular Backup
Use this screen to configure 3G WAN connection.
Advanced
Use this screen to enable or disable PTM over ADSL, Annex M/Annex J,
and DSL PhyR functions.
General
Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
Guest / More AP
Use this screen to configure multiple BSSs on the VMG.
MAC
Use this screen to block or allow wireless traffic from wireless devices of
Authentication
certain SSIDs and MAC addresses to the VMG.
WPS
Use this screen to configure and view your WPS (Wi-Fi Protected Setup)
settings.
WMM
Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
Others
Use this screen to configure advanced wireless settings.
Channel Status
Use this screen to scan wireless LAN channel noises and view the results.
WLAN Scheduler
Use this screen to schedule the times the Wireless LAN is enabled.
LAN Setup
Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP
Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP
Use this screen to turn UPnP and UPnP NAT-T on or off.
Additional
Use this screen to configure IP alias and public static IP.
Subnet
STB Vendor ID
Use this screen to configure the Vendor IDs of the connected Set Top Box
(STB) devices, which have the VMG automatically create static DHCP
entries for the STB devices when they request IP addresses.
Wake on Lan
Use this screen to remotely turn on a device on the local network.
TFTP Server Name
Use DHCP option 66 to identify a TFTP server name.
Static Route
Use this screen to view and set up static routes on the VMG.
DNS Route
Use this screen to forward DNS queries for certain domain names through
a specific WAN interface to its DNS server(s).
Policy Route
Use this screen to configure policy routing on the VMG.
RIP
Use this screen to configure Routing Information Protocol to exchange
routing information with other routers.
VMG3925-B10C/B30C User's Guide
29
Advertisement
Table of Contents
