Download Print this page

Modifiers - Kenmore HE4t 110.4508 Owner's Manual And Installation Instructions

Front-loading automatic washer
Hide thumbs

Advertisement

Table of Contents
Preset cycle settings of Water Temperature, Spin Speed, and
Rinse Options can be changed. You can change a modifier after
starting a cycle anytime before the selected Modifier begins. Not
all Modifiers are available with all options and cycles.
MODIFIERS
AUI0 TIMP CONTROL
O EXTRAHOT/ COLD O EXTRA.HIGH
O.HOT / COLD
¢ .HIGH
• WARM / WARM
O MEDIUM
e WARt_/ COLD
OLOW
O SkinCare Rir)se
O COLD/ COLD
• EXTRALOW
¢ 2ND RINSE
@ TAP COLD / COLD
0 NO SPiN
0 NOR#AL
RINSE
/
,
/ .....
,
,/
\
/
J
WATER TE#P
SPiN SPEED
RINSE
V,_I,SH i II)NS
OPTIONS
To change the water temperature,
select the WATER TEMP
button until the desired setting glows.
To change the spin speed, select the SPIN SPEED button
until the desired setting glows.
HEAVY
NORMAL
LIGHT
SOIL LEVEL
To change cycle time, select SOIL LEVEL button.
Normal Rinse
Consists of a two phase rinsing process that is effective for
everyday laundry.
2nd Rinse
A second rinse can be used to aid in the removal of detergent or
bleach residue from garments. This option provides an additional
rinse with the same water temperature as the Normal rinse. This
is the default rinse setting for the Whitest Whites cycle.
SkinCare Rinse
This option provides the best rinse level among all others, to
allow for even better detergent removal.
Wash/Rinse
Temp
Select a water temperature
based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.
Warm rinses leave the loads dryer than cold rinses. Warm rinses
increase wrinkling. In cold climates, a warm rinse makes the load
more comfortable to handle. Cold rinses save energy.
Temperature
Guide
Wash Water Temperature
Suggested Fabrics
Extra Hot
Sturdy colorfast fabrics
Heavy soils
HOT*
Whites and pastels
Heavy soils
WARM
Bright colors
Moderate to light soils
COLD
Colors that bleed or fade
Light soils
* When used with Stain Treat option, the water is heated
gradually to assist in the removal of organic soils such as
blood.
In wash water temperatures
colder than 60°F (15.5°C),
detergents do not dissolve well. Soils may be difficult to remove.
Auto Temp Control
ATC (Auto Temp Control) electronically
senses and maintains a
uniform water temperature.
ATC regulates incoming hot and cold
water. The ATC is automatically turned ON when a cycle is
selected. (See "Preset Cycle Settings" in "Cycles.")
ATC ensures consistent cleaning.
ATC works for the wash temperature
with Extra Hot/Cold,
Hot/Cold, Warm/Warm, Warm/Cold,
and Cold/Cold
settings.
The Cold rinse temperatures depend on the cold water at
your faucet.
For the Tap Cold/Cold setting, both wash and rinse
temperatures
depend on the cold water at your faucet.
ATC works for the rinse temperature with the Warm/Warm
setting. The cold rinse temperature depends on the cold
water at your faucet.
18

Hide quick links:

Advertisement

Table of Contents
loading

  Also See for Kenmore HE4t 110.4508