Pausing Or Restarting; Changing Cycles, Options And Modifiers; Cycles - Kenmore Autimatic washers with Capypso wash motion Use And Care Manual

4. Pour measured liquid fabric softener into the fabric softener
dispenser, if desired.
• Do not overfill. The dispenser holds 3 oz (94 mL), or a
capful of fabric softener.
• The fabric softener is dispensed in the final rinse.
• Do not spill or drip any fabric softener on the clothes.
NOTE: Use only liquid fabric softener in this dispenser.
5. Close the washer lid.
6. Select a Cycle. This turns on the washer display. (See
"Cycles.")
7. Select an Option, if desired. (See "Options.")
8. Select the desired Modifiers. (See "Modifiers.")
9. Press START. The wash cycle begins and the display shows
the estimated remaining time.
NOTE: If you do not press Start within 5 minutes of selecting
the cycle, the washer automatically shuts off.
To pause the washer at any time
Press STOP/CANCEL
To restart the washer
Close the lid and press START.
You can change Cycles, Options and Modifiers any time before
Start is pressed.
• A short tone sounds when a change is selected.
• Two short tones sound if an unavailable combination is
selected. The last selection will not be accepted.
Changing Cycles after pressing Start
1. Press STOP/CANCELtwice.
2. Select the desired wash cycle.
3. Press START.
The washer restarts at the beginning of the new cycle.
NOTE: If you do not press Start within 5 minutes of pausing the
washer, the washer automatically shuts oft.
Changing Options and Modifiers after pressing Start
You can change an Option or Modifier anytime before the
selected Option or Modifier begins.
1. Press STOP/CANCEL
2. Select the new Option and/or Modifiers.
3. Press START to continue the cycle.
Use these pads to choose the right wash cycle for the type of
fabrics you are washing.
SELECt" C YCLE
• For most loads, use the time recommended in the preset
cycle settings.
• For heavy soil and sturdy fabrics, use more wash time.
• For light soil and delicate fabrics, use less wash time.
HEAVY DUTY
Use this cycle to get 19 to 23 minutes of wash time for loads of
sturdy, colorfast fabrics such as work clothes. Cycle combines
high speed wash action and high spin speed. The preset cycle
wash time is 23 minutes. Stain Treat is the default option for this
cycle, but it can be turned off. (See "Changing Cycles, Options
and Modifiers.")
NORMAL
Use this cycle to get 12 to 16 minutes of wash time for normally
soiled cottons and linens. Cycle combines medium speed wash
action and high spin speed. The preset cycle wash time is 14
minutes.
JEANS/COLORS
Use this cycle to get 14 to 18 minutes of wash time for dark,
colored items that may run or fade. Cycle combines low/medium
speed wash action and high speed final spin. The preset cycle
wash time is 16 minutes.
WHITEST WHITES
This cycle introduces liquid chlorine bleach to the load at the
proper time for improved whitening of your heavily soiled white
fabrics. Use this cycle to get 19 to 23 minutes of medium speed
wash action and high speed final spin. For maximum soil and
stain removal, liquid chlorine bleach must be used. The preset
cycle wash time is 23 minutes. Stain Treat is the default option for
this cycle, but it can be turned off. (See "Changing Cycles,
Options and Modifiers.")
DELICATE/CASUAL
Use this cycle to get 12 to 16 minutes of low speed wash action
for no-iron fabrics and garments indicating "Gentle" cycle on the
care label. Low/medium spin speed is used to reduce wrinkling.
The preset cycle wash time is 14 minutes.
BULKY ITEMS
Use this cycle to get 13 to 17 minutes of wash time for large
items like blankets and comforters. Cleaning starts with a spray
of water and detergent mixture to thoroughly saturate your large
load. This is followed by low/medium wash action and low/
medium spin speed to maintain load balance. The preset cycle
wash time is 15 minutes.
12