Download Print this page

Normal Sounds; Options - Kenmore HE4t 110.4508 Owner's Manual And Installation Instructions

Front-loading automatic washer
Hide thumbs

Advertisement

Table of Contents
Rinse & Spin
Use this cycle to get a rinse and spin only. This cycle combines
fast-speed tumbling and extra high speed spin. If desired, you
can reduce the spin speed by selecting the speed you want from
the SPIN SPEED modifier.
Rinse & Spin is useful for
Loadsthat
need rinsing only.
Adding fabric softener to a load using the fabric softener
dispenser.
Drain & Spin
Use this cycle to drain your washer or to drain and spin your
wash load. The spin speed is preset to extra high. If desired, you
can reduce the spin speed by selecting the speed you want from
the SPIN SPEED modifier.
NOTE: Loads of synthetics, delicate fabrics, handwashables,
and
woolens should be drained with no spin or low spin to avoid
fabric stress.
As with any new product, you will hear sounds that you are not
accustomed
to. You may hear various sounds when the door is
locked or unlocked, and during the washing, rinsing, or spinning
process. Between changes in wash actions, there will be
momentary pauses. You will hear water spraying and splashing
during the wash and rinse cycles. These new sounds and pauses
are part of normal washer operation. (See "Troubleshooting.")
You can customize your wash by adding options to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all Options are
available with all cycles.
OPT(ONS
S
@
J
PREWASN
/
STAIN TREAT
/i
.....
\
SAVE ENERGY
PLUS
/
EXTENDED SP(N
O
END of CYCLE
SIGNAL
ON / OFF
See the "Laundry Guide" section for an overview of possible
options for each Wash Cycle selection.
You can select more than one option for a cycle. Some
options cannot be added to some cycles, for example, Stain
Treat cannot be added to the Express Wash cycle.
If an option is available with a selected cycle, the light for that
option will glow when selected.
If an option is unavailable with a selected cycle, there will be a
short tone and the light for that option will not glow when
selected.
Prewash
Use this option for loads of heavily soiled items that need
pretreatment.
This option adds a 15-minute prewash and drain to
the main wash cycle.
Add detergent to the Prewash and Main Wash compartments
of the Dispenser Drawer.
When using Prewash, do not use liquid detergent in the Main
Wash compartment.
Use powdered detergent for the main
wash cycle (see "Using the Dispenser").
NOTE: The Prewash and Soak options cannot be selected in the
same cycle.
Stain Treat
Use this option for heavily soiled loads that need improved stain
treatment. When Stain Treat is selected, the water temperature
of
the selected wash cycle is automatically set to warm. The water
will then be heated to a hot water temperature to aid in stain
removal. This option will provide optimal removal of organic
stains such as blood.
NOTE:
If Stain Treat is selected with the Sanitary cycle, the water will
be heated to a very hot temperature.
The Stain Treat and Energy Saver options cannot be selected
in the same cycle.
Save Energy Plus
The Save Energy Plus option allows you to increase your energy
savings on the higher temperature cycles (Whitest Whites and
Heavy Duty) while maintaining cleaning performance
by
lengthening the wash time by only 10 minutes.
NOTE: For the best energy performance,
use the Normal/Casual
Cycle.
Extended
Spin
Use this option to add an additional spin to any cycle to improve
drying times for some heavy fabrics or special-care
items by
reducing excess water, which may save energy.
End of Cycle Signal
This signal is helpful when you are removing items from the
washer as soon as it stops. Select ON or OFE
17

Hide quick links:

Advertisement

Table of Contents
loading

  Also See for Kenmore HE4t 110.4508