Download Print this page

Changing Cycles, Options And Modifiers; Status Lights - Kenmore 461970203975 Use & Care Manual

He 3t front-loading automatic washer
Hide thumbs

Advertisement

Powdered detergent: Put the SEPARATOR in the back
• position, behind the guides, as shown following. There will be
a gap between the bottom of the wash cycle detergent
compartment
and the bottom of the separator.
2
LIQUI
SC
Separator in back position, behind guides
1. Separator
2. Guide
NOTE: The separator will be in the powder (back) position when
shipped from the factory•
Bleach compartment
(Number 5 in Dispenser Illustration)
Add NO MORE THAN 1/3cup (80 mL) liquid chlorine bleach to this
compartment.
The bleach will be automatically diluted and
dispensed at the best time during the first rinse after the wash
cycle. This compartment
cannot dilute powdered bleach.
Always measure liquid chlorine bleach. Use a measuring cup
with a pour spout; do not guess.
Do not fill beyond the "MAX" level. Overfilling could cause
severe garment damage.
Fabric Softener
compartment
(Number 6 in Dispenser Illustration)
Add % cup (60 mL) liquid fabric softener to this compartment.
Fabric softener will be automatically dispensed in the final rinse.
Do not fill beyond the "MAX" level.
1. To pause the washer at any time, select PAUSE/CANCEL
2. To continue the cycle, select and hold START (for
approximately
t second).
Not all Options and Modifiers are available with all Cycles.
Cycles, Options and Modifiers can be changed anytime before
START is selected.
Options and Modifiers can be changed anytime after START is
selected and before the start of the selected Option or Modifier.
To cancel a cycle and select a new cycle
1. Select PAUSE/CANCEL twice.
2. Select desired cycle.
3. Select the desired OPTIONS.
4. Select and hold START (for approximately 1 second) to restart
the washer at the beginning of the new cycle.
To cancel a cycle
1. Select PAUSE/CANCEL twice.
2. The washer powers down, the door unlocks, and clothes can
be removed.
NOTE: If the water level or the temperature is too high, the
washer will drain automatically before the door unlocks.
To change Options or Modifiers after the cycle has started
1. Select PAUSE/CANCEL
2. Select the desired OPTIONS or MODIFIERS.
3. Select and hold START (for approximately 1 second) to
continue the cycle.
To drain the washer manually
1. Select PAUSE/CANCEL
2. Select DRAIN/SPIN.
3. Select and hold START (for approximately 1 second) to begin
the drain.
4. When the spin is complete, the door unlocks. Items can be
removed from the washer.
S tus
Lights
These lights show which portion of the cycle the washer is
operating• They also indicate when you can add an additional
item to the wash cycle and when the controls are locked•
STATUS
ADD A GARMENT •
SOAK! PREWASH •
WASH •
RINSE•
SPIN •
CLOTHES CLEAN •
CONTROL LOCKED •
m
F
i
Adding items
You can add items to the washer after the cycle has started for
Express Wash, Normal/Casual,
Heavy Duty, Whitest Whites, and
Sanitary if the ADD A GARMENT status light is glowing,
13

Hide quick links:

Advertisement

loading

  Related Manuals for Kenmore 461970203975

This manual is also suitable for:

110