If the telephone number is a telephone system extension, be aware of call
forwarding. The outdial call should be call forwarded back to the system.
Otherwise, the outdial message will be recorded as a new message, and
may cause a new outdial. Check with your system administrator to make
certain the timer for call forward on no answer is longer than the timer for an
unanswered call (usually 4 rings).
The system allows each mailbox user to specify up to 9 outdial bins ( numbered
1‐9), each of which can contain an extension number, telephone number, or pager
sequence. Each outdial bin may contain up to 46 digits. A mailbox user may
insert a pause ( required in some pager sequences) by dialing
An alternate telephone number. This can be skipped if desired. If the system
fails to reach you at the primary bin destination after the programmed
number of attempts, it will automatically attempt to notify you at the alternate
bin destination using the same number of attempts. If after this, the system
sill has not reached you, no further attempts are made.
The type of message that causes an outdial call. A user can specify: all new
messages, or only priority new messages. In addition, a user can limit
outtalking to messages from a member of a group list, or from a particular
mailbox.
How long the system waits after a message has been received before placing the
outdial call.
Suite 64 HD Voicemail Mailbox User Guide
*
.
4-11