Erase Your Temporary Greeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4; Personal Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 - PCS Digital Suite 64 Hard Drive User Manual

4.7
4.8
4-4
Suite 64 HD Voicemail Mailbox User Guide
Erase Your Temporary Greeting
To erase your temporary greeting:
At the main menu, press
1.
1
2. Press for greeting, then press
3
3. Press for temporary greeting.
Personal Access Code
→ →
3 2 2
There is one access code that is associated with each user mailbox. Each access
code may be from 1 to 9 digits in length. The system administrator can program a
minimum and maximum length for mailbox access codes. Zero should not be
used as the first digit. An initial, temporary access code is given to each user and
is used to enter the system for the very first time. It should not be used again.
Your access code should represent numbers that are easy for you to remember yet
not easily guessed by other people. You are strongly discouraged from using
birthdays, employee numbers, social security numbers, etc., since these numbers
could be readily guessed by others. You are encouraged to change your access
code frequently.
To change your access code, use the personal options menu:
1. From the main menu, press
2
2. Press for access code, then press
0
3. Press for mailbox access code.
4. Enter the access code you have decided on, then press
3
for personal options.
3
for erase.
→ Create /→ → Mailbox → Enter →
0
Modify
code
3
.
2
to create/modify an access code.
access access
code
#
.
#