Local Termination Table View - Motorola 68390 - Vanguard 320 Router User Manual

A p p l i c a t i o n V i e w s
Termination sessions—see
Table View (Page 61).
SRB Wan Bridge Links
This button accesses a table providing traffic
statistics broken down by frame type for Local
Termination sessions—see
Table View (Page 62).

Local Termination Table View

Access: In the Bridge Configuration Information view, click
the Local Termination Config button.
This view contains two tables of local termination
information. The upper table lists up to 64
stations. Column headings are as follows:
StnNumber
Number (1-64) identifying a particular station.
MacAddr
The MAC address of the station; this value must
match the source MAC address of the frame
received from the LAN port or the destination
MAC address of a frame received from the WAN
for the session to be spoofed.
SAP
The SAP (Service Access Point) of the station. This
value must match the source SAP of the frame
D e v i c e M a n a g e m e n t
802.1d Static Link
SRB WAN Bridge Link
received from the LAN port or destination SAP of a
frame received from the WAN for the session to be
spoofed.
ProfileName
The name of the local termination profile
configured for this station (see LIcName below).
This name is used to obtain the associated
timeout and count values.
The lower table defines up to 8 local termination
profiles that may apply to link stations listed in
the upper table. Column headings are as follows:
Number
Number (1-8) identifying a particular local
termination profile.
LIcName
The name of the local termination profile
configured for this station (see ProfileName
above). This name is used to obtain the associated
time-out and count values.
AckTimer
The length of time in seconds after which the link
station will determine that a remote station has
failed to acknowledge an outstanding I frame or
supervisory frame with poll bit set to 1.
Page 57
S u p p o r t e d A p p l i c a t i o n s
M o t o r o l a V a n g u a r d