Local Termination Table View - Motorola 68384 - Vanguard 320 Router User Manual

S P E C T R U M E n t e r p r i s e M a n a g e r
SRB Wan Bridge Links
This button accesses a table providing traffic
statistics broken down by frame type for Local
Termination sessions—see
Table View (Page 86).

Local Termination Table View

Access: In the Bridge Configuration Information view, click
the Local Termination Config button.
This view contains two tables of local termination
information. The upper table lists up to 64
stations. Column headings are as follows:
StnNumber
Number (1-64) identifying a particular station.
MacAddr
The MAC address of the station; this value must
match the Source MAC address of the frame
received from the LAN port or the destination
MAC address of a frame received from WAN for
the session to be spoofed.
SAP
The SAP (service access point) of the station; this
value must match the Source SAP of the frame
received from the LAN port or destination SAP of a
SRB WAN Bridge Link
frame received from WAN for the session to be
spoofed.
ProfileName
The name of the local termination profile
configured for this station (see entry for
"LIcName" below). This name is used to obtain the
associated timeout and count values.
The lower table defines up to 8 local termination
profiles that may apply to link stations listed in
the upper table. Column headings are as follows:
Number
Number (1-8) identifying a particular local
termination profile.
LIcName
The name of the local termination profile
configured for this station (see entry for
"ProfileName" above). This name is used to obtain
the associated timeout and count values.
AckTimer
The length of time in seconds after which the link
station will determine a remote station has failed
to acknowledge an outstanding I frame or
supervisory frame with poll bit set to 1.
RcvAckTimer
The length of time in tenths of seconds that the
link station will wait to acknowledgment a frame
81 of 95
M o t o r o l a V a n g u a r d D e v i c e s