Table of Contents
Advertisement
C o n f i g u r a t i o n V i e w s
Figure 6: Device Configuration View
Interface Configuration View
Access:
From the Icon Subviews menu for a selected
Interface icon in the Interface Device view, select IF
Configuration.
This view provides the following information for
the selected interface:
Operation Status
The current operational state of the interface.
Valid values are: On, Off, or Testing.
D e v i c e M a n a g e m e n t
Admin. Status
The desired operational state of the interface.
Valid values are: On, Off, or Testing.
Last Change
The 'System UpTime' value when the interface
entered its current operational state.
IP Address/Network Mask
This window provides a list of the user-defined
names and IP addresses for the interface.
Physical Address
The Ethernet (MAC) address of the interface.
Bandwidth
The estimated bandwidth of the interface,
measured in bits per second. For interfaces that
do not vary in bandwidth, or no accurate estimate
can be made, a nominal bandwidth is provided.
Packet Size
The largest packet that can be transmitted or
received by the port, displayed in octets.
Queue Length
The length of the outbound packet queue, in
packets.
Page 115
I n t e r f a c e C o n f i g u r a t i o n V i e w
M o t o r o l a V a n g u a r d
Hide quick links:
Advertisement
Table of Contents
