Motorola 68390 - Vanguard 320 Router User Manual page 102

A p p l i c a t i o n V i e w s
facilities added; REV=add reverse charging;
PACK=add packet size negotiation; WIND=add
window size negotiation.
OutBarFacil
Identifies which facilities will be blocked on an
outbound call: NONE=no facility blocked; REV= bar
reverse charging; FAST=bar fast select; BCUG=bar
bilateral closed user group; DGRAM=bar datagram.
InBarFacil
Identifies which facilities will be blocked on an
inbound call: NONE=no facility blocked; BCUG=bar
bilateral closed user group; DGRAM=bar datagram;
REV=bar reverse charging.
RoutDigits
The number of routing digits in the call user data
(used on X.25 links attached to a PDN where the
private network address is carried in the call user
data).
OutDigStrip
The number of prefix digits that will be removed
from the called address before forwarding the call
to a PDN.
InDigStrip
The number of prefix digits that will be removed
from the incoming calling address before
forwarding the call from a PDN.
D e v i c e M a n a g e m e n t
SubAddrSize
The number of digits in the subaddress of an X.25
address.
FacilSubcrip
Identifies any facility subscriptions in effect for
this port. Applicable codes and descriptions are
listed in Table
Table 38: Facility Subscription Codes
Code
NONE Subscription to facilities not enforced.
FCN_ON Flow Control Negotiation enabled. Packet and
window size negotiation facilities in an
inbound call will be allowed. Packet and
window size facilities will always be included
in outbound calls and call
accepted/connected when this parameter is
set.
Flow Control Negotiation disabled. Inbound
FCN_OFF calls containing packet and window size facil-
ities will be cleared. Packet and window size
facilities will not be present in outbound calls
and call accepted/connected when this
parameter is set.
Page 102
S u p p o r t e d A p p l i c a t i o n s
38:
Description
M o t o r o l a V a n g u a r d