Motorola 68390 - Vanguard 320 Router User Manual page 91

User guide
Hide thumbs Also See for 68390 - Vanguard 320 Router:
Table of Contents

Advertisement

A p p l i c a t i o n V i e w s
Table 30: Compression Overrides
Compression OR
none
c8k
c16k
cB8k
cB16k
cE8Kb
cE8Kb
nc
NumLeadingDi
Select the number of leading digits to be stripped
off the received digits stream before sending the
digits stream to the remote port.
PreFixDigits
Select digits to be added in front of or at the end
of the received stream (after the stripped digits
are removed) before sending the digit stream to
the remote port. Range: 1 to 20 characters (valid
characters are 0 through 9, '*', '#', 'R', 'P', and '-').
The character '-' is allowed only for ease of
D e v i c e M a n a g e m e n t
Description
No override, use port configured
value.
8k CVSELP.
16k CVSELP.
Bundled 8k CVSELP.
Bundled 16k CVSELP.
Enhanced Bundled 8k CVSELP.
Enhanced Bundled 16k
CVSELP.
Skipped during configuration.
reading. It is not sent to the remote port. The 'P'
character is used to indicate a pause is required
in the playout of the digits at the remote end. The
length of the pause is equal to "Tx Interdigit
Pause Time" as defined at the called port
(destination port). Leading 'P' characters are not
supported. The character 'R' is used to separate
the prefix digit string from the postfix digit string.
The maximum number of digits that can be sent
to the remote end is 16.
PostFixDigits
Select DTMF digits to be added at the end of the
received DTMF stream before sending the digit
stream to the remote port. Range: 1 to 20
characters (valid characters are 0 through 9, '-',
',', '/', '*', '#', and 'P'). The characters '-', ',', and '/'
are allowed only for ease of reading. They are not
sent to the remote port. The 'P' character is used
to indicate a pause is required in the playout of
the digits at the remote end. The length of the
pause is equal to "Tx Interdigit Pause Time" as
defined at the called port (destination port). The
maximum number of digits that can be sent to
the remote end is 16.
EntryNumber
The entry number in the Voice Switch Table.
Page 91
S u p p o r t e d A p p l i c a t i o n s
M o t o r o l a V a n g u a r d

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vanguard 320

Table of Contents