Motorola 68390 - Vanguard 320 Router User Manual page 27

A p p l i c a t i o n V i e w s
Table 7: Deactivation Modes
Mode
none Backup port can only be deactivated by
operator intervention.
busyout The backup port is deactivated after all
the calls on that port are cleared for a
predetermined amount of time. This
substitutes the value assigned to the
parameter Link Hold Time with the
value assigned to the parameter Idle
Disconnect Time in the X.25 Port
Record. The Idle Disconnect Time will
then work as described in the
Operators Guide. When Deactivation
Mode = BUSY OUT and Link Hold Time
= 0 (zero) the overall effect is the same
as setting this entry to NONE.
imm The backup link is terminated
immediately when the monitored port is
restored regardless of how many calls
are present.
newvalNone Same functionality as 'none.'
D e v i c e M a n a g e m e n t
Description
Hold Time
This replaces the value of the parameter Idle
Disconnect Timer in the X.25 Port Record and
specifies how long (in seconds) the backup link
remains active after the original link is back up.
Password
The password used by the remote station to
determine if dial access is authorized.
Redial Time
The time in seconds between dial attempts when
bringing up a switched service call.
Redial Counter
The number of times that the Switched Service
will attempt to redial when redial timer is expired.
A value of zero will allow unlimited attempts.
Security
This specifies under what conditions the
port/channel authorizes call request.
displays the security channel and descriptions:
Page 27
S u p p o r t e d A p p l i c a t i o n s
Table 8
M o t o r o l a V a n g u a r d