Motorola 68390 - Vanguard 320 Router User Manual page 20

A p p l i c a t i o n V i e w s
Time Reset
Time when node was restarted or statistics were
reset by a CTP/SNMP Manager command.
State
Current activity state of the channel. See
for expanded descriptions of possible states.
D e v i c e M a n a g e m e n t
Table 4: Channel State Descriptions
State
dsp-down
Table 4
idle
negotiating
data-passing
ap-clearing
np-clearing
clearing-call
flushing-on-clr
flushing-data
flushing-dc-ring
clearing
Page 20
S u p p o r t e d A p p l i c a t i o n s
Description
DSP is down.
DSP is ready to be assigned to a
connection.
Source has accepted the Call Request
and is waiting for a Call Accept from
the destination node.
Normal data passing state.
Call Clear request arrived from access
side.
Call Clear request arrived from
network side.
A call collision or a Call Clear along
with an X.25 reset or a "start buffer
discarding."
Call has been cleared with FLUSH;
waiting for packets to flush from DC
Handler rings.
Waiting for x.25 confirm.
Waiting for the data on the DC Handler
ring to be flushed after an x.25 confirm
or stop discard.
Call has been cleared.
M o t o r o l a V a n g u a r d