Ip Interchange Table View; Output Table - Motorola 68390 - Vanguard 320 Router User Manual

A p p l i c a t i o n V i e w s
of the largest IP packet to be transmitted on the
organization's network.
Routing Table Size
The maximum number of routes that may be
stored in the IP routing table.
Default Gateway
The IP address of the default gateway this router
will use when a packet's destination route is
otherwise unknown. The next hop must be to a
router on a directly attached network.
Default Gateway Metric
The cost metric for a transmission to this router's
default gateway, usually given as the number of
network hops.
Default IPAddress
Unless overridden by the Internal NetMask, the
Router ID is used as the default IP address of the
router. This is the principal management address
of the router, and is the IP source address of
SNMP Trap, PING and other ICMP frames
originated from the router. If both the Router ID
and Internal NetMask are left undefined (as
0.0.0.0), the default IP address is the IP address
of the lowest numbered operational interface of
the router.
D e v i c e M a n a g e m e n t
Advertised Default Hops
The cost metric (usually the number of hops) that
RIP will advertise for the default route of 0.0.0.0.
A metric of 16 advertises that the default route is
unreachable.

IP Interchange Table View

Access: From the Icon Subviews menu for the
MotRouterApp Application icon, select IP Interchange
Table.
This view contains the following two tables on
routing interchange information:
•

Output Table

• Input Table
Output Table
This area of the IP Interchange Table view has the
following column headings:
Index
Number identifying a particular output route.
NeighAS
The AS number assigned to an EGP neighbor. If
nonzero, the value must match a Neighboring AS
number entered in the IP EGP AS Information
Table. A value of 0 adds the route to the default
Output Exchange Table, which is reported to all
Page 64
S u p p o r t e d A p p l i c a t i o n s
(Page 64)
(Page 65)
M o t o r o l a V a n g u a r d