Table of Contents
Advertisement
A p p l i c a t i o n V i e w s
DataBuffInUse
The number of data buffers in use.
DataBuffGauge
The maximum number of data buffers in use
since last reset.
MemAvailOnCard
Amount of memory available on the processor
card in bytes.
MemUsedForDataBuff
Amount of memory used for data buffers in bytes.
FlashModuleSize
The size of the flash module in bytes. This refers
to the currently selected bank of flash when there
is an alternate bank of flash installed.
CPUutil
Percentage of time the CPU processed traffic data
(as opposed to performing diagnostic tests or
processing node-control data) in the last 64
seconds.
Port Statistics View
Access:
From the Icon Subviews menu for the
MotNodeMgmtApp Application icon, select Port Statistics.
This view contains a table of statistical
information about the modeled device's ports.
Three buttons at the bottom of the view access
D e v i c e M a n a g e m e n t
separate tables for receive, transmit, and error
statistics. Column headings for the main table are
as follows:
PortNo.
Identifies a particular port on the modeled device.
PortType
The type of port. Valid values are: illegal, null,
pad, x25, mux, test, spare2, spare3, spare4,
mx25, spare, bsc2780, bsc3270, vip, pos, sdlc,
ncrbsc, fri, xdlc, bstd, rs366, spare5, spare6,
ibm2260, vap, tbop, n270, tcop, tr, sl, and eth.
PortStatus
Current status of the port. Valid values are:
disabled, enabled, busyOut, up, and down.
PortState
Current state of the port. The value x28 indicates
command mode; pad indicates data mode.
PortSpeed
This is the speed of the port when Clock=Int; this
is detected clock speed if Clock=Ext. If Port Speed
is 0, Clock=Ext but clocking is not being received
from attached device.
PktsQueued
Number of packets currently queued for output.
Page 75
S u p p o r t e d A p p l i c a t i o n s
M o t o r o l a V a n g u a r d
Hide quick links:
Advertisement
Table of Contents
