Table of Contents
Advertisement
A p p l i c a t i o n V i e w s
PktQueue
The maximum number of data packets a channel
on this port will queue for transmission before
invoking flow control to the attached channel.
Channel Statistics View
Access:
In the X.25 Configuration Table, click the Logical
Link/Timer Statistics button.
This view contains two tables that provide logical
channel and timer information for each of the
device's X.25 ports.
Logical Channel Statistics
Column headings are as follows:
PortNo
Identifies a particular X.25 port.
LinkMode
Indicates whether logical devices at each end of
the link will be Data Terminal Equipment (dte) or
Data Communication Equipment (dce).
MaxPVCChan
The maximum number of logical channels that
can be used for Permanent Virtual Circuits (PVCs)
on this X.25 link. The total number of PVC and
SVC (Switched Virtual Circuit) channels on a link
should be kept as small as possible and
D e v i c e M a n a g e m e n t
consistent with needs. PVC connections must be
configured in the PVC Table.
StartPVCChan
The starting logical channel number for the PVCs
on this link. Not used if MaxPVCChan is zero.
MaxSVCChan
The maximum number of logical channels on this
link that can be used for SVCs.
StartSVCChan
The starting logical channel number for the SVCs
on this link.
Timer Statistics
Column headings are as follows:
T1Retry
The T1 link retry timer value, in tenths of a
second.
T4Poll
The time, in tenths of a second, that an idle link
will be probed for assurance of connection to the
remote device. A value of zero indicates the timer
is disabled. If enabled, this poll time value must
be greater than T1Retry.
Restart
The number of seconds before a restart request
will be repeated.
Page 105
S u p p o r t e d A p p l i c a t i o n s
M o t o r o l a V a n g u a r d
Hide quick links:
Advertisement
Table of Contents
