Motorola 68390 - Vanguard 320 Router User Manual page 84

A p p l i c a t i o n V i e w s
ABAB signalling bits. The value X means don't
care. The range is from 0000 to 1111.
RxWinkStartTime
The maximum time to wait for the beginning of
the wink signal from the PBX before declaring a
wink start malfunction. Granularity is 50
milliseconds.
RxMinimumReceiv
The amount of time required to declare a valid
wink. Granularity is 10 milliseconds.
RxCalledEndGlar
The length of time when a wink pulse will be
detected as a glare condition. Granularity is 50
milliseconds.
RxFirstDigitTim
The maximum time (in seconds) to wait for the
first DTMF digit before declaring a "busyout"
state. Granularity is 1 second.
RxInterdigitTim
This is the maximum time (in seconds) to wait for
a subsequent receive digit before declaring a
misdial. Granularity is 1 second.
TxWinkDelay
The time delay from receiving a valid Offhook
state to start transmitting a wink. Granularity is
10 milliseconds.
D e v i c e M a n a g e m e n t
TxWinkWidth
The width of the transmitted wink pulse.
Granularity is 10 milliseconds.
TxDigitDelay
The time delay before transmitting the first DTMF
digit after a wink is received. Granularity is 10
milliseconds.
TxDigitOn
The time DTMF digits are transmitted.
Granularity is 10 milliseconds.
TxInterdigitTim
The time between transmitting DTMF digits.
Granularity is 10 milliseconds.
RxInterringWait
The maximum time to wait for subsequent receive
rings before declaring a call abandoned condition.
Granularity is 1 second.
RxRingStateChan
The amount of time to declare the change in the
ring state. Granularity is 50 milliseconds.
TxRingerOffLong
This timer is the "long off" period for ringer
cadences that have a short and long off period.
For the cases where the ring cadence defines one
off period, the Tx Ringer Off Long must be equal
Page 84
S u p p o r t e d A p p l i c a t i o n s
M o t o r o l a V a n g u a r d