Multi Foil Colour Printings; Requirements; Prepare The Image To Be Printed - Oki DP-5000 User Manual

4. Set
Media Type
used.
5. In
Print Settings
check box so that the
displayed.
6. In the
Spot Colour Settings
radio button.
Colour(s)
7. Set to
Print Using
8. Enabled ink cartridges among those installed in
the printer are displayed in
. Click the radio button(s) of the ink car-
tridge(s)
tridge(s) to be used.
Note:
If bidirectional communication is not possible, all the
usable ink cartridges are displayed.
9. When you complete the setup, click
the dialog box.
10. Click in the Print dialog box to start printing.
OK
Multi foil colour printing
Use the steps outlined below for foil colour printing us-
ing two foil colour ink cartridges. By associating each
foil colour with a colour (or colour component) in your
Chapter 5 - Specialised Printing Operations
depending on the paper to be
click the
Use Spot Colours
dialog box is
Spot Colours
click the
Use Foil
.
Single Ink
Select Ink Car-
to close
OK
s
application, you can print with two foil colours or two
foil colours plus black. You can use this method with
most applications that support colour.

Requirements

The media and ink cartridge requirements for multi foil
colour printing are the same as in the single foil colour
printing. The only difference being that both gold and
silver foil ink cartridges must be used.

Prepare the image to be printed

Use any application to create the image or document
you want to print. Then set the colours corresponding to
each foil colour you want to use. For example, set the
parts of the image that you want to print in gold foil to
yellow and those of the image that you want to print in
silver foil to grey. When you want to print foil colours
and black simultaneously, you must also specify the
area you want to print in black.
Note 1:
Since all of the colour and grayscale data is binarized
in multi colour printing, gradation cannot be repre-
sented.
English
47