Preparing Your Site For Installation; Prerequisites And Preparation; Chapter - Cisco ASR 1001-X Hardware Installation Manual

Preparing Your Site for Installation

This chapter contains important safety information you should know before working with the Cisco ASR
1001-X Router, and guides you through the process of preparing your site for router installation.
This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
•
•
•

Prerequisites and Preparation

Before you perform the procedures in this guide, we recommend that you:
• Read the safety guidelines in the next section and review the electrical safety and ESD-prevention
• Ensure that you have all of the necessary tools and equipment (see the "Tools and Equipment"section).
• Ensure that you have access to the Cisco ASR 1000 Series Aggregation Services Routers Software
Prerequisites and Preparation , page 23
Safety Guidelines , page 24
Compliance Requirements, page 25
Cautions and Regulatory Compliance Statements for NEBS , page 26
Standard Warning Statements, page 27
Site Planning, page 31
Preventing Electrostatic Discharge Damage, page 40
Electrical Safety, page 41
Chassis-Lifting Guidelines, page 41
Tools and Equipment, page 42
Checking the Shipping Container Contents, page 43
Cisco ASR 1001-X Router Installation Checklist, page 44
guidelines in this guide.
Configuration Guide (an online document that is available for viewing or download at Cisco.com) during
the installation.
3
C H A P T E R
Cisco ASR 1001-X Router Hardware Installation Guide
23