Chassis Installation
Figure 27.
Proper ventilation and cooling must allow the chassis to operate within the temperature and humidity levels described in
the following table.
Table 21.
Mounting Options
There are two options for mounting the chassis in a standard equipment rack or telecommunications cabinet:
Standard: In this configuration, the flanges of the mounting brackets are flush with the front of the chassis. This
is the default configuration as shipped. Refer to the Standard Installation of the Chassis section of this chapter.
OL-24878-01
System Airflow & Ventilation
Operating Temperature and Humidity Recommendations
Operating Temperature
Operating Humidity Levels
Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄
0oC to +55oC
5 to 85% non-condensing
Equipment Rack Configuration ▀