Radar Range Setup - Furuno NAVNET 1824C Operator's Manual

7.2.2 Radar range setup

You may choose the radar ranges you wish to use, from the RADAR RANGE SETUP menu.
After choosing the ranges desired, change the range with the RANGE key to activate range
settings. Available ranges depends on the radar used.
At least two ranges must be turned on. When less than two ranges are turned on you
cannot escape from the RADAR RANGE SETUP menu.
Note that this function is not available with the GD-1920C.
1. Press the MENU key to show the main menu.
2. Press the RADAR RANGE SETUP soft key to show the RADAR RANGE SETUP menu.
0.125nm ON
0.25nm ON
0.5nm ON
0.75nm ON
1nm OFF
1.5nm ON
2nm OFF
3nm ON
4nm OFF
6nm ON
8nm OFF
12nm ON
16nm OFF
24nm ON
36nm OFF
48nm OFF
64nm OFF
72nm OFF
*
MAXIMUM RANGE XXnm
* = Max. range depends on network radar used and is set on the network radar at installation.
Range unit: nm
3. Use the Trackball to select the range which you want to turn on or off.
4. Press the ON/OFF soft key to turn a range on or off as appropriate.
5. Press the RETURN soft key to register settings.
6. Press the MENU key to close the menu.
Model
1824C
1834C
1934C
1944C
1954C, 1964C
RANGE
SETUP
ON/OFF
RETURN
Radar range setup menu
Maximum Range
24 nm, km, sm
36 nm, km, sm
48 nm, km, sm
64 nm, km, sm
72 nm, km, sm
7. CUSTOMIZING YOUR UNIT
ON
0.25km
0.5km ON
0.75km ON
1km ON
1.5km OFF
2km ON
3km OFF
4km ON
6km OFF
8km ON
12km OFF
16km ON
24km OFF
OFF
36km
48km OFF
64km OFF
OFF
72km
*
MAXIMUM RANGE XXkm
Range unit: km
RANGE
SETUP
ON/OFF
RETURN
7-7