Routes; Creating Routes - Furuno COLOR VIDEO PLOTTER 1833C Operator's Manual

3. PLOTTER OPERATION
3.9

Routes

Often a trip from one place to another involves several course changes,
requiring a series of route points (waypoints) which you navigate to, one after
another. The sequence of waypoints leading to the ultimate destination is called
a route. Your unit can automatically advance to the next waypoint on a route, so
you do not have to change the destination waypoint repeatedly.
You can store up to 200 routes, and a route may have 35 waypoints.
3.9.1

Creating routes

Entering a route with existing waypoints
This method constructs routes by using existing waypoints.
1. Press the [MENU] key.
2. Press the WAYPOINTS/ROUTES soft key.
3. Press the ROUTES soft key to open the ROUTE menu. (No data will be
shown if there are no routes entered.)
Number of waypoints
in route
3-36
Total length of route
Route name
001
002
003
004
PUSH ENTER KNOB TO
SEARCH FOR
Route menu
LENGTH
25.6 nm
WAYPOINTS
35
LENGTH
56.7 nm
WAYPOINTS
2
LENGTH
21.1 nm
WAYPOINTS
3
LENGTH
21.1 nm
WAYPOINTS
3
---
ROUTE
GOTO
NEW
ROUTE
EDIT
ROUTE
ERASE
ROUTE
RETURN