Outputting Data Through The Network - Furuno COLOR VIDEO PLOTTER 1833C Operator's Manual

6. DATA TRANSFER
10. Press the RCV soft key followed by the [ENTER] knob.
The message "NOW RECEIVING DATA." is displayed. If no data could be
found, the message "(HOST NAME)' IS NOT FOUND." appears.
11. When the transfer is completed, the message "DATA TRANSFER
COMPLETED. PUSH ENTER KNOB TO CONTINUE." appears. Push the
[ENTER] knob to finish.
12. Press the [MENU] key to close the menu.
6.5

Outputting Data Through the Network

Follow the procedure below to output data through the network.
1. Press the [MENU] key to open the menu.
2. Press the SYSTEM CONFIGURATION, SYSTEM SETUP, PORT SETUP
and OUTPUT THROUGH NETWORK soft keys.
3. Select sentence with the trackball.
4. Press the ON/OFF soft key to turn sentence on or off.
5. Press the RETURN soft key.
6. Press the [MENU] key to close the menu.
6-10
SELECT SENTENCE
AAM --
APB --
BOD --
BWR --
DPT --
GGA --
GLL --
GTD --
MTW --
RMA --
RMB --
RMC --
VHW --
VTG --
WPL --
XTE --
ZDA --
HDT --
HDG --
MWV --
Select sentence menu
SELECT
SNTNC
ON/OFF
RETURN