Td Display Setup - Furuno COLOR VIDEO PLOTTER 1833C Operator's Manual

5.7.3

TD display setup

The TD SETUP menu sets which Loran C or Decca chain to use to display TD
position. (Connection of a Loran C or Decca navigator is not necessary to
display TD position.)
1. Press the [MENU] key.
2. Press the SYSTEM CONFIGURATION, NAV OPTION and TD SETUP soft
keys to display the TD SETUP menu.
Displaying Loran C TDs
1. Select GRI, then press the EDIT soft key to show the GRI & station pair
window.
2. Adjust the trackball upward or downward to select GRI code.
3. Roll the trackball rightward to show the display below, to enable selection of
station pair.
4. Adjust the trackball vertically to select station pair.
5. Press the ENTER soft key to register your selection.
LORAN-C
GRI 9940 11-27
U.S. WEST COAST
CORRECTION 1 +000.0 s
CORRECTION 2 +000.0 s
DECCA
CHAIN 01 R-G
S BALTIC
CORRECTION 1 +00.00 lane
CORRECTION 2 +00.00 lane
TD setup menu
GRI & STATION PAIR
9940 11-27
U.S. WEST COAST
Loran GRI & station pair window
GRI & STATION PAIR
9940 11-27
U.S. WEST COAST
Loran C GRI & station pair window
5. CUSTOMIZING YOUR UNIT
TD
SETUP
EDIT
RETURN
5-25