Plotter Setup; Navigation Options - Furuno COLOR VIDEO PLOTTER 1833C Operator's Manual

5.3

Plotter Setup

This paragraph provides the information necessary for setting up the plotter
display.
5.3.1

Navigation options

Navigation options, for example, waypoint switching method, may be set on the
PLOTTER SETUP menu.
1. Show the plotter display, then press the [MENU] key open the main menu.
2. Press the PLOTTER SETUP soft key.
Item
Waypoint Chooses waypoint switching method.
Switching See "switching waypoints" on page
3-50.
Course You may extend a line from the own
Vector ship position to show ship's course. It
may be a vector (length depends on
ship's speed) or a simple line (course
bar).
Set GOTO Sets the method by which to navigate
Method to a quick point. See "3.10.1 Navigating
to a quick point."
D. BOX Sets up data boxes. See paragraph 5.5.
(soft key)
WAYPOINT SWITCHING ARRVL ALM CRCL
COURSE VECTOR
SET GOTO METHOD
Plotter setup menu
Contents of plotter setup menu
Description
5. CUSTOMIZING YOUR UNIT
PLOTTER
SETUP
LINE
1POINT EDIT
D. BOX
RETURN
Settings
Perpendicular,
Arrvl Alm Crcl,
Manual
Line, Vector, Off
1 Point, 35 Points,
35 Pts/Port
Service
Default Setting
Arrvl Alm Crcl
Line
1 Point
5-9