Sounder Setup; System Setup - Furuno COLOR VIDEO PLOTTER 1833C Operator's Manual

5. CUSTOMIZING YOUR UNIT
5.9

Sounder Setup

This section shows you how to customize your network sounder to your liking.
You can set fish alarm sensitivity, fine tune sensors, etc.
5.9.1

System setup

1. Show the sounder display, then press the [MENU] key.
2. Press the SOUNDER SYSTEM SETUP soft key.
Item
Fish Alarm Sets the fish alarm
Level sensitivity; that is, the
minimum echo strength
which will trigger the fish
alarms.
Transmission Turns TX power on/off.
(Continued on next page)
5-28
FISH ALARM LEVEL
TRANSMISSION
TVG 200 kHz
TVG 50k Hz
ECHO OFFSET 200 kHz
ECHO OFFSET 50 kHz
BOTTOM LEVEL 200 kHz
BOTTOM LEVEL 50 kHz
KP PULSE
SMOOTHING
TLL OUTPUT
Sounder system setup menu
Sounder system setup menu description
Description
High: Orange and stronger
echoes trigger the alarm.*
Medium: Yellow and stronger
echoes trigger the alarm.*
Low: Green and stronger
echoes trigger the alarm.*
* = 8-color display
On, Off
SYSTEM
MEDIUM
SETUP
ON
3
EDIT
3
+00
SENSOR
+00 SETUP
+000
+000
INTERNAL
SM3
RETURN
ON
Settings
Medium
On
Default Setting