Error Messages - Furuno COLOR VIDEO PLOTTER 1833C Operator's Manual

7.9

Error Messages

In addition to alarm messages your equipment also displays error messages.
Error Message
Connection with the ETR was
cut.
Connection with the RADAR
was cut.
Low Voltage! Internal Battery
No bearing pulse detected.
No GPS fix!
No heading pulse detected.
Error messages
Meaning
Network sounder disconnected.
Radar disconnected.
Voltage of battery on circuit
board in display unit is low.
No bearing pulse from radar
antenna.
GPS navigator is turned off or
no GPS position data.
No heading pulse
7. MAINTENANCE, TROUBLESHOOTING
Check that display unit
where the sounder is
connected is turned on.
Check network sounder's
cabling.
Check that display unit
where the radar is
connected is turned on.
Check antenna cable.
Have a qualified technician
replace the battery.
Check antenna cable.
Check GPS navigator.
Check heading sensor.
Remedy
7-13