Arrival Alarm - Furuno COLOR VIDEO PLOTTER 1833C Operator's Manual

3.11.2

Arrival alarm

The arrival alarm informs you that your boat is approaching a destination
waypoint. The area that defines an arrival zone is that of a circle which you
approach from the outside of the circle. The alarm will be released if your boat
enters the circle. When the arrival alarm is active a red dashed circle marks the
arrival alarm area. Note that the arrival alarm and anchor watch alarm can be
turned on together.
1. Press the [ALARM] key to open the alarm menu.
2. Use the trackball to select ARRIVAL ALARM.
3. Press the EDIT soft key to show the arrival alarm window.
4. Use the trackball to select ON.
5. Use the trackball and the alphanumeric keys to enter alarm setting: Operate
the trackball to select digit; use the alphanumeric keys to enter value. The
available arrival alarm setting is 0.001 to 9.999 miles.
6. Press the ENTER soft key or push the [ENTER] knob to register setting.
7. Press the [ALARM] key to finish.
Own ship
: Alarm area
How the arrival alarm works
ARRIVAL ALARM
Arrival alarm window
¡
ON 0.010nm
¤
OFF
3. PLOTTER OPERATION
Alarm
range
Destination
waypoint
3-53