Furuno COLOR VIDEO PLOTTER 1833C Operator's Manual page 197

5. CUSTOMIZING YOUR UNIT
6. If necessary, you may enter a position offset to refine Loran C position
accuracy. Select (GRI) CORRECTION 1 or CORRECTION 2, then press the
EDIT soft key. Enter correction value with the trackball and alphanumeric
keys. Use the +
Press the ENTER soft key or push the [ENTER] knob.
7. Press the RETURN soft key twice.
8. Press the GENERAL SETUP soft key followed by the NEXT PAGE soft key.
9. Select "LORAN C" from "TD DISPLAY" and "TD" from "POSITION DISPLAY."
10. Press the [MENU] key twice to close the menu.
Displaying DECCA TDs
1. Select CHAIN, then press the EDIT soft key to show the chain & station pair
window.
2. Adjust the trackball upward or downward to select Decca chain number.
3. Roll the trackball rightward to show the display below, to enable selection of
station pair.
4. Adjust the trackball upward or downward to select station pair (R: red, G:
green and P: purple).
5. Press the ENTER soft key to register your selection.
6. If necessary, you may enter position offset to refine Decca position. Select
(CHAIN) CORRECTION 1 or CORRECTION 2, then press the EDIT soft key.
Enter correction value with the trackball and alphanumeric keys. Use the
+
ENTER soft key or push the [ENTER] knob.
7. Press the RETURN soft key twice.
8. Press the GENERAL SETUP soft key followed by the NEXT PAGE soft key.
9. Select "DECCA" from "TD DISPLAY" and "TD" from "POSITION DISPLAY."
10. Press the [MENU] key twice to close the menu.
5-26
- soft key to switch from plus to minus and vice versa.
S BALTIC
Decca chain and station pair window
S BALTIC
Decca chain and station pair window
- soft key to switch from plus to minus and vice versa. Press the
CHAIN STATION PAIR
01 R-G
CHAIN STATION PAIR
01 R-G